<var id="tdxtl"><video id="tdxtl"></video></var>
<var id="tdxtl"></var>
<cite id="tdxtl"></cite>
<var id="tdxtl"></var>
<cite id="tdxtl"></cite>
<var id="tdxtl"><video id="tdxtl"></video></var><var id="tdxtl"><video id="tdxtl"></video></var>
<ins id="tdxtl"></ins>
<var id="tdxtl"></var>
<var id="tdxtl"></var>
產品資料

MD20A升級產品MD20B

MD20B
產品簡介

magnescale厚度計、磁尺位置控制器MD20A升級產品MD20B可選擇分辨率0.1,0.2,0.5,1,2,2.5,4,5,10μm,在分辨率0.1μm時響應速度可達42m/s,MD20A升級產品MD20B可配用磁尺SR系列如SR721SP及高度計DG系列如DG155,DG205等產品,原點感應器/磁性開關PH-100。

詳細介紹
magnescale厚度計、磁尺位置控制器MD20A升級產品MD20B
Generates A/B phase output signal with a resolution of 0.5μm for feedback

to an NC unit and up/down output signal for a display unit.

Selectable resolution and output pulse width

With the optional PU20 power supply unit, power for up to 3 axes can be

supplied

 A/B phase signal, up/down signal, zero point signal and alarm signal output

by differential line driver. 

分辨率 Resolution:

0.1,0.2,0.5,1,2,2.5,4,5,10μm selectable(可選)

輸出脈寬

Output pulse width:

0.1,0.2,0.25,0.5,1,2,2.5,5,10,20μs selectable(可選)

輸出信號 

Output signal

A/B phase output and up/down output by differential line drive;both simultaneous

原點信號 

Zero point signal

In synch with scale signal (與尺信號同步)

報警  Alarm

Max.response speed exceeded, cable broken or disconnected, other circuit errors (超過*大響應速度或輸出信號錯誤時)

MD20A升級產品MD20B可反饋分辨率0.1微米的A/B90°相位差輸出信號至NC,

up/down信號至數顯表;

可選擇分辨率及輸出脈寬;

可采用PU20電源組以供三軸驅動;

差分線路驅動輸出A/B90°相位差信號、原點信號及報警信號; 

MD20A升級產品MD20B尺寸圖


magnescale厚度計、磁尺位置控制器MD20A升級產品MD20B可選擇分辨率0.1,0.2,0.5,1,2,2.5,4,5,10μm,在分辨率0.1μm時響應速度可達42m/s,MD20A升級產品MD20B可配用磁尺SR系列如SR721SP及高度計DG系列如DG155,DG205等產品。

滬公網安備 31011402005090號

强奷乱码中文字幕,乱子伦XXXX,俄罗斯小younv另类,玖玖热
<var id="tdxtl"><video id="tdxtl"></video></var>
<var id="tdxtl"></var>
<cite id="tdxtl"></cite>
<var id="tdxtl"></var>
<cite id="tdxtl"></cite>
<var id="tdxtl"><video id="tdxtl"></video></var><var id="tdxtl"><video id="tdxtl"></video></var>
<ins id="tdxtl"></ins>
<var id="tdxtl"></var>
<var id="tdxtl"></var>